.. _auto_curves_iihsintrusion_table:

*COMPUTES IIHS INTRUSION NUMBERS AND OUTPUT A TABLE OF VALUES*
==============================================================

Computes IIHS intrusion measurements for a side-impact or small-overlap crash test by resolving named structural measurement points (seat mounts, hinge pillars, pedals, etc.) against a reference node and returns a tabulated summary of intrusion values. Use this worker to automate IIHS cabin-intrusion scoring from d3VIEW curve labels without manual post-processing.

When to use
-----------

Classification: **process**.

Tagged: ``cabin_intrusion``, ``crash``, ``iihs``, ``intrusion``, ``kpi_table``, ``occupant_space``, ``side_impact``, ``small_overlap``.

Inputs
------

.. list-table::
   :header-rows: 1
   :widths: 20 20 20 20 20 20

   * - Label
     - ID
     - Type
     - Default
     - Required
     - Description
   * - Seat Mounts. Separate By Comma For More Than One
     - seat_mounts.separatebycommaformorethanone
     - string
     - Seat Mount 1, Seat Mount 2
     - 
     - Comma-separated d3VIEW curve label(s) for the seat-mount measurement points (e.g. 'Seat Mount 1, Seat Mount 2'); defaults to two seat-mount labels and is optional when fewer measurement locations are needed.
   * - Reference Node
     - reference_node
     - string
     - Ref Node 1, Ref Node 2, Ref Node 3
     - 
     - Comma-separated d3VIEW curve label(s) for the reference node(s) used as the IIHS intrusion baseline (e.g. 'Ref Node 1, Ref Node 2, Ref Node 3'); defaults to three reference labels.
   * - Lower Hinge Pillar
     - lower_hinge_pillar
     - string
     - Lower Hinge Pillar 1, Lower Hinge Pillar 2, Lower Hinge Piller 3
     - 
     - Comma-separated d3VIEW curve label(s) for the lower hinge-pillar measurement points (e.g. 'Lower Hinge Pillar 1, Lower Hinge Pillar 2, Lower Hinge Pillar 3'); defaults to three labels.
   * - Upper Hinge Pillar
     - upper_hinge_pillar
     - string
     - Upper Hinge Pillar 1, Upper Hinge Pillar 2, Upper Hinge Pillar 3
     - 
     - Comma-separated d3VIEW curve label(s) for the upper hinge-pillar measurement points (e.g. 'Upper Hinge Pillar 1, Upper Hinge Pillar 2, Upper Hinge Pillar 3'); defaults to three labels.
   * - Brake Pedal
     - brake_pedal
     - string
     - Brake Pedal
     - 
     - d3VIEW curve label for the brake-pedal intrusion measurement point; defaults to 'Brake Pedal'.
   * - Parking Brake
     - parking_brake
     - string
     - Parking Brake
     - 
     - d3VIEW curve label for the parking-brake intrusion measurement point; defaults to 'Parking Brake'.
   * - Steering Column
     - steering_column
     - string
     - Steering Column
     - 
     - d3VIEW curve label for the steering-column intrusion measurement point; defaults to 'Steering Column'.
   * - Rocker Panel
     - rocker_panel
     - string
     - Rocker Panel 1, Rocker Panel 2, Rocker Panel 3
     - 
     - d3VIEW curve label for the rocker-panel intrusion measurement point; leave at default or supply the matching label from the simulation database.
   * - Upper Dash
     - upper_dash
     - string
     - Upper Dash
     - 
     - d3VIEW curve label for the upper-dash intrusion measurement point; leave at default or supply the matching label from the simulation database.
   * - Left IP
     - left_i_p
     - string
     - Left IP
     - 
     - 
   * - Intrusion Type
     - intrusion_type
     - scalar
     - last
     - 
     - Selects the intrusion calculation method/type (e.g. 'raw' or a named IIHS variant); controls how peak or residual intrusion is derived from the resolved displacement curves.

Outputs
-------

.. list-table::
   :header-rows: 1
   :widths: 20 20 20 20

   * - Label
     - ID
     - Type
     - Description
   * - curves_iihsintrusion_table_output_1
     - curves_iihsintrusion_table_output_1
     - keyvalue
     - Key-value table containing the computed IIHS intrusion values (in mm) for each named structural measurement location, ready for downstream KPI rollup or report generation.

Disciplines
-----------

- cae.postprocessing.extraction
- cae.postprocessing.response
- engineering.crash.dynamics
- engineering.crash.occupant_safety

Runnable example
----------------

A runnable example is registered for this worker. Open the example workflow on the d3VIEW canvas: `/api/workflow/example?id=curves_iihsintrusion_table <https://www.d3view.com/api/workflow/example?id=curves_iihsintrusion_table>`_

.. raw:: html

   <hr style="margin-top:2em">
   <p style="font-size:11px;color:#888">
   Auto-generated from <code>transformation</code> schema. Worker id: <code>curves_iihsintrusion_table</code>. Schema hash: <code>baf451f244bc</code>. Hand-curated docs in <code>workerexamples/</code> override this page when present.
   </p>