OFFSET BASE CURVE TO STRAIN RATES¶
Offsets a quasi-static base curve along the stress/force axis to align it with a set of reference strain-rate curves. Use this worker when you need to synthesize a strain-rate-scaled version of a base material curve by anchoring it to existing rate-dependent reference curves.
When to use¶
Classification: process.
Tagged: curve_scaling, material_curve, offset, quasi_static, rate_dependent, strain_rate.
Inputs¶
| Label | ID | Type | Default | Required | Description |
|---|---|---|---|---|---|
| Curve In | curve_in | vector | — | The base quasi-static stress–strain (or force–displacement) curve to be offset; supplied as a single XY vector. Leave unconnected only if the offset operation is not required. | |
| Ref Curves | ref_curves | vector | — | Collection of reference strain-rate curves (XY vectors) used as the target anchors for the offset calculation; each curve should represent a distinct strain rate of the same material. |
Outputs¶
| Label | ID | Type | Description |
|---|---|---|---|
| curves_offset_to_strain_rates_output_1 | curves_offset_to_strain_rates_output_1 | vector | The resulting offset curve (XY vector) derived from the base quasi-static input after alignment to the reference strain-rate curves. |
Disciplines¶
- data.curve.pair
- data.curve.transform
- engineering.material.calibration
- engineering.material.characterization
Runnable example¶
A runnable example is registered for this worker. Open the example workflow on the d3VIEW canvas: /api/workflow/example?id=curves_offset_to_strain_rates
Auto-generated from transformation schema. Worker id: curves_offset_to_strain_rates. Schema hash: 6d23006da4a4. Hand-curated docs in workerexamples/ override this page when present.