As a simulation engineer, we always like quick access to experimental data. Over the years, with a powerful framework that was developed within d3VIEW, this is now possible to import and visualize experimental data. With a few configurations, you can further tie this with simulation data for easy overlay and comparison. This following video shows…
During one of my recent trips, a question was raised about how LS-DYNA treats thick shells in contact in particular if the contact would detect the surface sides. This simulation Thickshells in contact shows that LS-DYNA treats the thickshells as solids in which all external (free) surfaces are included in the contact. ERODING contact would…
Understanding the rate of convergence when employing Explicit Dynamic Relaxation can be very useful to track model sensitivity and to solve convergence problems. d3VIEW now has support to auto-extract the convergence information after a simulation is completed. It also processes DR graphics data to identify points of divergence. Attached is a snapshot from a recent…
Stabilizing structures in Dynamic Relaxation Phase to improve convergence.
To view results from manual what-if studies, LS-OPT provides a great way to import these results so we can take advantage of its data visualization package. The attached image, an excerpt from the LS-OPT Manual, shows how we can do this.
Sensors can be used to trigger entities based on certain criteria. The following image is a high-level steps involved to take advantage of sensors in LS-DYNA.
Rigidwalls are analytical representations of surfaces or volumes that are frequently used to represent stiff structures that are either stationary or in motion. Viewing of such analytical definitions in D3PLOTs were not possible for most rigidwalls. A new option in LS-DYNA named DISPLAY that can now be used to any *RIGIDWALL definitions which causes LS-DYNA…
Several joints are available in LS-DYNA that can be defined between two rigid bodies or nodal rigid bodies. The difficult part of the joint definition from the pre-processing point of view is the creating of nodes that defines the joint axes and subsequent merging of them to the respective rigid bodies. To simplify this problem,…
A nice publication on hydrocodes by Dr. Benson .
Update The blog no longer seems to exist. I recently came across a nice blog written by QUI. It is remarkable that he is willing to share examples and his experiences in LS-DYNA. The broad spectrum of LS-DYNA applications can never be fully covered by a single blog or a small set of publications. It…
