3. Workers and Input Options¶
Use this section to to view different input types of Workers and their behaviour.
3.1. Material calibration - CURVE_TRUETOEFFECTIVESTRESS¶
Yield calculation type with offset value - 0.00008707¶
Yield calculation type = Offset
:sup: Yield calculation type = Offset
Yield type = Strain
:sup: Yield type = Strain
Yield type = Stress
:sup: Yield type = Stress
Yield type = effective
:sup: Yield type = effective
Yield calculation type = linearity
:sup: Yield calculation type = linearity
Yield calculation type = Stress and value = 0.045¶
:sup: Yield calculation type = Stress and value = 0.045
All Yield calculation types
:sup: All Yield calculation types
CURVE_ENGTOTRUESTRESS with axis types¶
Axis = X
:sup: Axis = X
Axis = Y
:sup: Axis = Y
Axis = Both
:sup: Axis = Both
Overlay of all Axis options with input
:sup: Overlay of all Axis options with input
CURVE_SMOOTH¶
SMOOTH TYPE = FORWARD
:sup: SMOOTH TYPE = FORWARD
SMOOTH TYPE = BACKWARD
:sup: SMOOTH TYPE = BACKWARD
SMOOTH TYPE = FORWARD_BACKWARD
:sup: SMOOTH TYPE = FORWARD_BACKWARD
Overlay of all SMOOTH TYPE options with input
:sup: Overlay of all SMOOTH TYPE options with input
CURVE_INTEGRATE¶
IGNORE = NONE
:sup: IGNORE = NONE
IGNORE = POSITIVE
:sup: IGNORE = POSITIVE
IGNORE = NEGATIVE
:sup: IGNORE = NEGATIVE
Overlay of all IGNORE options with input
:sup: Overlay of all IGNORE options with input
CURVE_INTERPOLATE¶
INTERPOLATION TYPE = LINEAR
:sup: INTERPOLATION TYPE = LINEAR
INTERPOLATION TYPE = PCHIP
:sup: INTERPOLATION TYPE = PCHIP
INTERPOLATION TYPE = POLYNOMIAL
:sup: INTERPOLATION TYPE = POLYNOMIAL
INTERPOLATION TYPE = SPLINE
:sup: INTERPOLATION TYPE = SPLINE
INTERPOLATION TYPE = MAKIMA
:sup: INTERPOLATION TYPE = MAKIMA
CURVE_TRUETOENGSTRESS¶
TENSION
:sup: TENSION
COMPRESSION
:sup: COMPRESSION
Overlay of all TENSION and COMPRESSION
:sup: TENSION and COMPRESSION